Difference between revisions of "Makerbot 3D Printer"

From Macro Wiki
Jump to: navigation, search
(Read this carefully before printing)
 
Line 11: Line 11:
 
Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.
 
Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.
  
In order to change filament, you must unload it using the Makerbot Print software.  Make sure that the extruder temperature is 50°C before pulling it. [https://support.makerbot.com/learn/makerbot-replicator-2x/extruders/how-to-unclog-a-nozzle_13469]
+
In order to change the filament, you must unload it using the Makerbot Print software.  Make sure that the extruder temperature is 50°C or lower before pulling it. [https://support.makerbot.com/learn/makerbot-replicator-2x/extruders/how-to-unclog-a-nozzle_13469]

Latest revision as of 16:49, 2 August 2018

The 3D Makerbot printer has an exclusive workbench composed of a dedicated computer. Please use it only for printing tasks. Example.png

Read this carefully before printing

This printer uses Makerbot PLA only. Do not use ABS or generic PLA. Please read the recommendations of the Smart Extruder+ [1].

Place blue tape on the platform. This will allow the extraction of the printed piece more easily.[2]

Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.

In order to change the filament, you must unload it using the Makerbot Print software. Make sure that the extruder temperature is 50°C or lower before pulling it. [3]