Difference between revisions of "Makerbot 3D Printer"

From Macro Wiki
Jump to: navigation, search
(Read this carefully before printing)
(Read this carefully before printing)
Line 8: Line 8:
  
 
Place blue tape on the platform. This will allow the extraction of the printed piece more easily.[https://support.makerbot.com/learn/makerbot-replicator-2/getting-started/blue-tape_11302]
 
Place blue tape on the platform. This will allow the extraction of the printed piece more easily.[https://support.makerbot.com/learn/makerbot-replicator-2/getting-started/blue-tape_11302]
 +
 +
Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.

Revision as of 13:41, 2 August 2018

The 3D Makerbot printer has an exclusive workbench composed of a dedicated computer. Please use it only for printing tasks. Example.png

Read this carefully before printing

This printer uses Makerbot PLA only. Do not use ABS or generic PLA. Please read the recommendations of the Smart Extruder+ [1].

Place blue tape on the platform. This will allow the extraction of the printed piece more easily.[2]

Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.