Makerbot 3D Printer

From Macro Wiki
Revision as of 16:49, 2 August 2018 by Juancho (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The 3D Makerbot printer has an exclusive workbench composed of a dedicated computer. Please use it only for printing tasks. Example.png

Read this carefully before printing

This printer uses Makerbot PLA only. Do not use ABS or generic PLA. Please read the recommendations of the Smart Extruder+ [1].

Place blue tape on the platform. This will allow the extraction of the printed piece more easily.[2]

Make sure that the platform is set correctly before printing. If it is not, the platform and the extruder could break down.

In order to change the filament, you must unload it using the Makerbot Print software. Make sure that the extruder temperature is 50°C or lower before pulling it. [3]